GX 470 V8-4.7L (2UZ-FE) (2004)
/Page-1353007.png)
2. After connecting the following to SST connect them to the horn button assy.
SST 09082-00802 (09082-10801, 09082-30801)
3. Using 3 wire harness, wind the wire harness at least 2 times each around the bolts installed on the left and right sides of the horn button
assy.
CAUTION:
-
Tightly wind the wire harness around the bolts so that there is no slack.
-
If there is slack in the wire harness, the horn button assy may come loose due to the shock when the air-bag is deployed. This is highly
dangerous.
4. Face the upper surface of the horn button assy upward. Separately tie the left and right sides of the horn button assy to the disc wheel
through the hub nut holes. Position the horn button assy connector so that it hangs downward through a hub hole in the disc wheel.
CAUTION:
-
Make sure that the wire harness is tight. It is very dangerous when looseness in the wire harness results in the horn button assy coming free
through the shock from the airbag deploying.
