GX 470 V8-4.7L (2UZ-FE) (2004)
CAUTION:
-
Never dispose of a front seat outer belt assy with an inactivated pretensioner.
-
The seat belt pretensioner produces a sizeable exploding sound when it activates, so perform the operation outdoors so that it will not be a
nuisance to nearby residents.
-
When activating a front seat outer belt (with seat belt pretensioner), control operation at least 10 m (33 ft) away from the front seat outer belt.
-
Use gloves and safety glasses when handling a front seat belt with an activated pretensioner.
-
Always wash your hands with water after completing activation.
-
Do not apply water, etc. to a front seat outer belt with an activated pretensioner.
-
When activating the seat belt pretensioner, always use the specified SST (SRS airbag deployment tool). Perform operation in a place away from
electrical interference.
SST 09082-00700
DISPOSE OF FRONT SEAT OUTER BELT ASSY RH (WHEN NOT INSTALLED IN VEHICLE)
NOTE:
-
When disposing of the front seat outer belt (with the seat belt pretensioner) only, never use the customer's vehicle to activate the seat belt
pretensioner.
-
Be sure to follow the procedures listed below when activating the seat belt pretensioner.
a. Remove the outer belt assy RH.
HINT: Cut the belt near the seat belt retractor.
b. Check the functioning of SST (See step 1-(a)).
SST 09082-00700, 09082-00770
c. Connect SST.