GX 470 V8-47L Alternator Removal and Installation
c. Mount SST (C) in a vise.
d. Insert SST (B) into SST (C), and attach the pulley nut to SST (C).
e. To loosen the pulley nut, turn SST (A) in the direction shown in the illustration.
NOTE: To prevent damage to the rotor shalt, do not loosen the pulley nut more than one-half of a turn.
f.
Remove the generator from SST (C).
g. Turn SST (B), and remove SST (A and B).
h. Remove the pulley nut and pulley.
4. REMOVE GENERATOR COIL ASSY
a. Remove the 4 bolts.