GX 470 V8-4.7L (2UZ-FE) (2004)
/Page-1118018.png)
34.
Install the steering intermediate shaft No. 2.
A.
Align the matchmarks on the power steering gear assembly and steering intermediate shaft No. 2.
B.
Install the steering intermediate shaft No. 2 to the power steering gear assembly with the bolt.
Torque: 36 N.m (370 kgf.cm, 27 ft.lbf)
35.
Install the steering sliding yoke.
A.
Install the steering sliding yoke to the steering column assembly and slide it upward.
B.
Install the steering sliding yoke to the intermediate shaft No. 2 with the 2 bolts.
Torque: 36 N.m (370 kgf.cm, 27 ft.lbf)
36.
Connect the tie rod end sub-assembly LH.
