GX 470 V8-4.7L (2UZ-FE) (2004)
HINT:
Insert the bolts and position it with the power steering gear assembly as a unit.
Then install the bolts on the frame.
26.
Install the front stabilizer bar.
27.
Install the 2 front stabilizer bar bushings No. 1.
NOTE:
^
Install the bushing to the inner side of the bushing stopper on the stabilizer bar.
^
Install the stabilizer bushing No. 1 as shown in the illustration.
28.
Install the front LH bushing and bracket with 2 bolts.
Torque: 40 N.m (410 kgf.cm, 30 ft.lbf)
29.
Install the front RH bushing and bracket with 2 bolts.
Torque: 40 N.m (410 kgf.cm, 30 ft.lbf)