GX 470 V8-4.7L (2UZ-FE) (2004)
e) Using SST, remove the bearing guide nut.
SST 09631-20060
NOTICE: Be careful not to damage the oil seal lip.
f) Remove the O-ring.
g) Remove the dust cover.
h) Using SST and a hammer, drive out the oil seal from the bearing guide nut.
SST 09950-60010 (09951-00300), 09950-70010 (09951-07100)
i)
Wind vinyl tape to the control valve shaft.
j) Using a plastic hammer, tap out the valve assembly with the bearing guide nut from the control valve housing.
NOTICE: Be careful not to damage the oil seal lip.
k) Using a screwdriver, remove the 4 teflon rings from the control valve assembly.
NOTICE: Be careful not to damage the grooves for the ring.
l)
Using a screw extractor, remove the union seat from the control valve housing.