GX 470 V8-4.7L (2UZ-FE) (2004)
a) Install the front suspension upper arm assembly, and temporarily tighten bolt, the 2 washers and the nut.
b) Install the bracket with the bolt.
Torque: 5.8 Nm (59 kgf-cm, 51 inch lbs.)
c) Install a new nut and a new clip.
Torque: 110 Nm (1,120 kgf-cm, 81 ft. lbs.)
9. CONNECT SKID CONTROL SENSOR WIRE
a) Install the connect skid control sensor wire with the 2 bolts.
Torque: 13 Nm (127 kgf-cm, 9 ft. lbs.)
10. INSTALL FRONT DISC WHEEL
Torque: 112 Nm (1,140 kgf-cm, 83 ft. lbs.)
11. STABILIZE SUSPENSION
12. FULLY TIGHTEN FRONT SUSPENSION UPPER ARM ASSY LH
a) Fully tighten the nut.
Torque: 115 Nm (1,170 kgf-cm, 85 ft. lbs.)