GX 470 V8-4.7L (2UZ-FE) (2004)
b) Using SST and a press, remove the lower arm bush No. 2 LH.
SST 09632-36010, 09950-00020, 09950-60010 (09951-00400)
7. INSPECT FRONT SUSPENSION ARM SUB-ASSY LOWER NO. 1 LH
a) As shown in the illustration, flip the ball joint stud back and forth 5 times before installing the nut.
b) Using a torque wrench, turn the nut continuously at a rate of 3 - 5 seconds per 1 turn, and take the torque reading on the 5th turn.
Turning torque: 3.0 Nm (31 kgf-cm, 27 inch lbs.) or less
c) Check for any cracks and grease leaks on the ball joint dust cover.
8. INSTALL FRONT LOWER ARM BUSH NO. 2 LH
a) Using SST and a press, install a new lower arm bush No. 2 LH.
SST 09710-26010 (09710-05081), 09950-60020 (09951-00890)
NOTICE: Press the lower arm bush No. 2 in the lower arm at the bush positioning protrusions become perpendicular to the lower arm as
shown in the illustration.