GX 470 V8-4.7L (2UZ-FE) (2004)
8. REMOVE STABILIZER BAR FRONT
9. INSTALL STABILIZER BAR FRONT
10. INSTALL FRONT STABILIZER BAR BUSH NO.1
a) Install the 2 front stabilizer bar bush No.1.
HINT:
^
Install the bushing to the inner side of the bushing stopper on the stabilizer bar.
^
Install the stabilizer bush No.1 as the protrusion to be on the inner side of the vehicle.
11. INSTALL FRONT STABILIZER BRACKET NO.1 LH
a) Install the front stabilizer bracket No.2 LH with the 2 bolts.
Torque: 40 Nm (410 kgf-cm, 30 ft. lbs.)
12. INSTALL FRONT STABILIZER BRACKET NO.1 RH
HINT: Install the RH side by following the same procedures with the LH side.
13. INSTALL FRONT STABILIZER LINK ASSY LH
a) Install the front stabilizer link assembly LH with the 2 nuts.
Torque: 70 Nm (710 kgf-cm, 52 ft. lbs.)
HINT: If the ball joint turns together with the nut, use a hexagon (6 mm) wrench to hold the stud.
14. INSTALL FRONT STABILIZER LINK ASSY RH
HINT: Install the RH side by following the same procedures with the LH side.
15. INSTALL FRONT WHEELS
Torque: 112 Nm (1,140 kgf-cm, 83 ft. lbs.)
Rear