GX 470 V8-4.7L (2UZ-FE) (2004)
c. Using SST, fully tighten the 6 flare nuts on the front stabilizer control tube No.1 and No. 2.
SST 09023-12700
Torque: 44 Nm (450 kgf-cm, 33 ft. lbs.)
d. Install the front stabilizer tube protector with the 2 bolts.
Torque: 29 Nm (296 kgf-cm, 21 ft. lbs.)
30. INSTALL REAR STABILIZER CONTROL TUBE NO.1 AND NO.2
a. Install the rear stabilizer control tube No. 1 and No.2.
1. Apply suspension fluid to the threads of the flare nuts.
2. Temporarily tighten the 4 flare nuts on the rear stabilizer control tube No. 1.
NOTICE:
^ Ensure that the control tubes of not contact other parts.
^ Do not bend the control tubes.
^ Do not damage the control tubes and flare nuts.
b. Install the 4 bolts.
Torque: 29 Nm (296 kgf-cm, 21 ft. lbs.)