GX 470 V8-4.7L (2UZ-FE) (2004)
44.
Install the transfer cover type T oil seal.
A.
Using the SSTs and a hammer, drive in a NEW oil seal until its surface is flush with the retainer upper surface.
B.
Coat the lip of the oil seal with MP grease.
^
SST P/N 09950-60010-02
(09951-00590-01),
09950-70010-02
(09951-07100-01)
45.
Install the transfer RH bearing retainer sub-assembly.
A.
Apply FIPG sealant to the bearing retainer sub-assembly, as shown.
^
FIPG sealant:
P/N 08826-00090, Three Bond 1281, or equivalent
B.
Apply sealant to the bolt thread.
Sealant: P/N 08833-00080,
Toyota Genuine Adhesive 1344, Three Bond 1344,
Loctite 242, or equivalent
C.
Install the bearing retainer sub-assembly with the 5 bolts.
Torque:
11.5 N.m (117 kgf.cm, 8 ft.lbf)
46.
Install the transfer gear shift head No. 2.
Using a pin punch and hammer, install the slotted pin to the gear shift head No. 2.