GX 470 V8-4.7L (2UZ-FE) (2004)
18.
Remove the 2 transfer output washers and collar.
19.
Remove the transfer case rear by removing the 12 bolts and 2 clamps.
HINT:
If necessary, tap the transfer case rear with a plastic hammer to remove it.
20.
Remove the transfer gear shift fork No. 2 w/transfer high and low clutch sleeve.
A.
Using a hexagon wrench, remove the plug No. 1.
B.
Using a magnetic finger, remove the spring and ball from the hole.
C.
Using a pin punch and hammer, drive out the slotted spring pin.
D.
Remove the gear shift fork No. 2 and high and low shift fork shaft.
E.
Remove the high and low clutch sleeve.
21.
Remove the center differential lock fork sub-assembly w/front drive clutch sleeve.