GX 470 V8-4.7L (2UZ-FE) (2004)
/Page-789001.png)
Torque Converter: Technical Service Bulletins
A/T - Torque Converter Bolt Installation Precautions
L-SB-0007-11
February 17, 2011
Torque Converter Bolt Installation
Service Category
Drivetrain
Section
Automatic Transmission/Transaxle
Market
USA
Applicability
Introduction
The purpose of this TSIB is to provide information regarding the installation of the correct torque converter bolts during automatic
transmission/transaxle assembly replacement. Incorrect torque converter bolts or missing washers can cause damage to the torque converter assembly.
Use the information in this bulletin when installing an automatic transmission/transaxle assembly.
Not all applications will use washers on the torque converter bolts.
Warranty Information
Installation Procedure
^
When removing torque converter bolts and washers take special care that the same bolts and washers are used when installing the torque converter.
^
Using an incorrect size bolt or washer may cause damage to the torque converter assembly.
