GX 470 V8-4.7L (2UZ-FE) (2004)
/Page-811004.png)
a. Using a chisel and hammer stake the front drive pinion nut
19. INSTALL PROPELLER SHAFT ASSY FRONT
20. REFILL DIFFERENTIAL OIL
21. INSPECT AND ADJUST DIFFERENTIAL OIL
22. INSTALL ENGINE UNDER COVER ASSY REAR
Torque: 29 Nm (296 kgf-cm, 21 ft. lbs.)
23. INSTALL ENGINE UNDER COVER SUB-ASSY NO.1
Torque: 29 Nm (296 kgf-cm, 21 ft. lbs.)
