GX 470 V8-4.7L (2UZ-FE) (2004)
Drive/Propeller Shaft: Service and Repair
Overhaul (Front Propeller Shaft)
OVERHAUL
1. REMOVE TRANSMISSION UNDER COVER
2. REMOVE ENGINE UNDER COVER ASSY REAR
3. REMOVE PROPELLER SHAFT ASSY FRONT
a. Place matchmarks on the propeller shaft flange and differential flange.
b. Remove the 4 nuts, 4 bolts, 4 washers and front propeller shaft assy.
c. Place matchmarks on the propeller shaft flange and transfer flange.
d. Remove the 4 nuts, 4 washers and front propeller shaft assy.