GX 470 V8-4.7L (2UZ-FE) (2004)
c. Align the matchmarks on the yoke and transfer flange.
d. Install the propeller shaft assy with the 4 nuts and 4 washers.
Torque: 88 Nm (898 kgf-cm, 65 ft. lbs.)
c. Align the matchmarks on the yoke and transfer flange.
d. Install the propeller shaft assy with the 4 nuts and 4 washers.
Torque: 88 Nm (898 kgf-cm, 65 ft. lbs.)