GX 470 V8-4.7L (2UZ-FE) (2004)
a.
Align the matchmarks on the yoke and the differential flange.
b.
Install the propeller shaft assembly with the 4 bolts, 4 nuts, and 4 washers.
Torque: 88 N.m
(898 kgf.cm, 65 ft.-lbf)
C.
Align the matchmarks on the yoke and the transfer flange.
d.
Install the propeller shaft assembly with the 4 nuts and 4 washers.
Torque: 88 N.m
(898 kgf.cm, 65 ft.-lbf)
3.
Remove and replace the LH and RH upper control arm assemblies one side at a time. Refer to TIS, 2003 - 2006 model year GX 470 Repair
Manual: Rear Suspension: Upper Control Arm Assy: Replacement.