GX 470 V8-4.7L (2UZ-FE) (2004)
Torque: 6.9 Nm (70 kgf-cm, 61 inch lbs.)
c. Using the manual valve lever shaft, fully turn the manual lever shaft back and back off 2 notches. It is now in neutral.
d. Align the neutral basic line with the switch groove, and tighten the adjusting bolt.
Torque: 13 Nm (130 kgf-cm, 9 ft. lbs.)
e. Bend the tabs of the lock washer.
HINT: Bend at least 2 of the lock washer tabs.
5. CONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR
6. CONNECT BATTERY NEGATIVE TERMINAL
7. INSPECT PARK/NEUTRAL POSITION SWITCH ASSY
8. ADJUST PARK/NEUTRAL POSITION SWITCH ASSY
9. ADJUST SHIFT LEVER POSITION
10. INSPECT SHIFT LEVER POSITION