GX 470 V8-4.7L (2UZ-FE) (2004)
/Page-857006.png)
25. REMOVE BRAKE CONTROL WIRE
a) Remove the 4 screws.
b) Disconnect the clamp and remove the brake control wire.
26. REMOVE OIL PRESSURE SENSOR
a) Remove the oil pressure sensor from the brake master cylinder.
b) Remove the spacer and O-ring from the oil pressure sensor.
27. REMOVE BRAKE BOOSTER PUMP BRACKET NO.3
a) Using a hexagon wrench (5 mm), remove the 2 bolts and brake booster pump bracket No.3.
28. REMOVE BRAKE BOOSTER PUMP BRACKET NO.2
a) Hold the brake booster w/ accumulator pump assembly, then using a hexagon wrench (5 mm), and remove the bolt and brake booster pump
bracket No.2 from the brake master cylinder.
29. REMOVE BRAKE BOOSTER W/ACCUMULATOR PUMP ASSEMBLY
a) Remove the brake booster w/accumulator pump assembly from the brake master cylinder.
30. REMOVE BRAKE BOOSTER PUMP BRACKET NO.1
a) Remove the bolt and brake booster bracket No.1 from the brake booster w/ accumulator pump assembly.
b) Remove the 2 washers, 3 bushes, 2 collars and shaft from the brake booster w/ accumulator pump assembly.
