GX 470 V8-4.7L (2UZ-FE) (2004)
47.
Install the switches. Install NEW gaskets, the indicator switches, and the case No.1 plug.
Torque: 37 N.m (377 kgf.cm, 27 ft.lbf)
48.
Install hoses.
NOTE:
^
Place the hose between the transfer rear case and the actuator motor.
^
Adjust the clamp position to prevent excessive bending, pulling, or pushing on the hose.
49.
Install the transfer assembly.
A.
Install the transfer to the automatic transmission.
B.
Install the 2 clamps and 8 bolts.
Torque: 24 N.m (245 kgf.cm, 17 ft.lbf)
50.
Install the automatic transmission assembly.
Refer to TIS, 2003 or 2004 model year GX 470 Repair Manual: Automatic Transmission / Trans: Automatic Transmission Assy: Replacement
51.
Install the transfer case lower protector with the 4 bolts.
Torque: 18 N.m (184 kgf.cm, 13 ft.lbf)
52.
Add transfer oil.
Refer to TIS, 2003 or 2004 model year GX 470 Repair Manual: Transfer: Transfer Oil: Adjustment