GX 470 V8-4.7L (2UZ-FE) (2004)
7.
Remove the transfer gear shift head No.2.
Using a pin punch and hammer, remove the slotted pin from the gear shift head No. 2.
8.
Remove the transfer RH bearing retainer sub-assembly by removing the 5 bolts.
HINT:
If necessary, tap the extension housing with a plastic hammer to remove it.
9.
Remove the transfer cover type T oil seal.
Using a screwdriver and hammer, remove the oil seal from the bearing retainer sub-assembly.
10.
Remove the transfer case cover sub-assembly by removing the 4 bolts.
11.
Remove the breather oil deflector.
12.
Remove the front output shaft companion flange sub-assembly.