GX 470 V8-4.7L (2UZ-FE) (2004)
31.
Install the transfer gear shift fork No. 2 w/transfer high and low clutch sleeve.
A.
Install the gear shift fork No. 2 and high and low shift fork shaft and high and low clutch sleeve.
NOTE:
Make sure to install the fork in the correct direction.
B.
Apply sealant to the plug No. 1 threads.
Sealant: P/N 08833-00080, Toyota Genuine Adhesive 1344, Three Bond 1344, Loctite 242, or equivalent
C.
Install the spring and ball to the hole.
D.
Install the plug No. 1 to the hole.
Torque: 18.6 N.m (190 kgf.cm, 14 ft.lbf)
E.
Using a pin punch and hammer, Install the slotted pin.
32.
Install the transfer output shaft spacer.
33.
Install the transfer output shaft front needle roller bearing.