GX 470 V8-4.7L (2UZ-FE) (2004)
40.
Install the front output shaft companion flange sub-assembly.
A.
Install the companion flange sub-assembly to the drive sprocket sub-assembly.
B.
Using the SST to hold the companion flange, install a NEW companion flange lock nut.
^
SST P/N 09330-00021
Torque: 118 N.m
(1,203 kgf.cm, 87 ft.lbf)
C.
Using a chisel and hammer, stake the companion flange lock nut.
41.
Install the rear output shaft companion flange sub-assembly.
Using the SST, install the rear companion flange sub-assembly in the same way as the front companion flange sub-assembly.
^
SST P/N 09330-00021
Torque: 118 N.m
(1,203 kgf.cm, 87 ft.lbf)
42.
Install the breather oil deflector.
43.
Install the transfer case cover sub-assembly with the 4 bolts.
Torque: 18 N.m
(184 kgf.cm, 13 ft.lbf)