GX 470 V8-4.7L (2UZ-FE) (2004)
Oil seal drive in depth:
-0.5 to 0.5 mm (-0.020 to 0.020 in.)
D.
Coat the lip of the oil seal with CMP grease.
E.
Using a snap ring expander, install the snap ring.
Repair Procedure - Steps 28 Thru 52
28.
Install the transfer shift actuator assembly.
A.
Install the actuator assembly with the 3 bolts.
Torque: 20 N.m
(204 kgf.cm, 15 ft.lbf)
B.
Using a screwdriver and hammer drive in the 2 snap rings.
29.
Install the rear output shaft sub-assembly, front drive chain, and driven sprocket sub-assembly.
A.
Install the rear output shaft sub-assembly and driven sprocket to the front drive chain.