GX 470 V8-4.7L (2UZ-FE) (2004)
A.
Using a chisel and hammer, loosen the staked part of the output shaft companion flange lock nut.
B.
Using the SST to hold the output shaft companion flange, remove the output shaft companion flange lock nut.
^
SST P/N 09330-00021
C.
Using the SSTs, remove the front output shaft companion flange sub-assembly.
^
SST P/N 09950-40011-02
(09951-04020, 09952-04010,
09953-04030, 09954-04010,
09955-04051, 09957-04010,
09958-04011)
13.
Remove the front transfer output shaft companion flange oil seal.
Using a screwdriver and hammer, remove the oil seal from the output shaft companion flange sub-assembly.
14.
Remove the rear output shaft companion flange sub-assembly in the same way as the front output shaft companion flange sub-assembly (step 12).
15.
Remove the rear transfer output shaft companion flange oil seal.
Using a screwdriver and hammer remove the oil seal from the rear output shaft companion flange sub-assembly.
16.
Remove the extension housing assembly by removing the 5 bolts.
HINT:
If necessary, tap the extension housing assembly rear with a plastic hammer to remove it.
17.
Remove the transfer extension housing type T oil seal.
Using a screwdriver and hammer, remove the oil seal.