GX 470 V8-4.7L (2UZ-FE) (2004)
A.
Using 2 screwdrivers and a hammer, tap out the snap ring.
B.
Remove the bolt, center differential lock fork sub-assembly, and front drive clutch sleeve.
22.
Remove the rear output shaft sub-assembly, front drive chain, and driven sprocket sub-assembly.
A.
Using a snap ring expander, remove the snap ring.
B.
Mount the transfer case rear in a vise.
C.
Using a plastic hammer, carefully tap the transfer case rear, and remove the rear output shaft sub-assembly together with the front drive
chain and the driven sprocket sub-assembly.