GX 470 V8-4.7L (2UZ-FE) (2004)
36.
Install the transfer extension housing type T oil seal.
A.
Using the SSTs and a hammer, drive in a NEW oil seal until its surface is flush with the housing upper surface.
^
SST P/N 00002-62091-02
(09223-46011), 09631-32020
B.
Coat the lip of the oil seal with MP grease.
37.
Install the extension housing assembly.
A.
Apply FIPG sealant to the extension housing assembly rear, as shown.
^
FIPG sealant:
P/N 08826-00090,
Three Bond 1281,
or equivalent
B.
Apply sealant to the bolt threads.
^
Sealant: P/N 08833-00080,
Toyota Genuine Adhesive 1344,
Three Bond 1344,
Loctite 242, or equivalent