GX 470 V8-4.7L (2UZ-FE) (2004)
The retainers are typically located 140 - 200 mm (5.5 - 7.9 in.) inboard of the lower corners of the windshield. The flat portion of the retainer is
adhered to the backside of the windshield with double-sided foam-backed tape.
3. Use a "Mini" Hacksaw with a fine tooth 10-inch blade to cut OFF the pin portion of the glass retainer flush with the flat portion of the windshield
retainer (see Figures 9 & 10 for pin location).
4. Test drive the vehicle to confirm the elimination of the noise.
5. Reinstall the plastic cowl top ventilator louver(s).