GX 470 V8-4.7L (2UZ-FE) (2004)
b. Install new dam applying double-sided tape all the way around the glass except where the dam is installed, as shown in the illustration.
Dimensions:
13. INSTALL WINDSHIELD MOULDING OUTER UPPER
a. Using a brush or sponge, coat the edge of the glass and the contact surface with Primer G.
NOTE:
-
Allow the primer coating to dry for 3 minutes or more.
-
Do not coat the adhesive with Primer G.
-
Do not keep any of the opened Primer G for later use.
b. Install the windshield moulding outer upper.
14. INSTALL WINDSHIELD GLASS
a. Clean and shape the contact surface of the vehicle body.
1. Using a knife, cut away any rough adhesive on the contact surface of the body to ensure the appropriate surface shape.
HINT: Leave as much adhesive on the body as possible.
2. Clean the contact surface of the body with a piece of shop rag saturated with cleaner.
HINT: Even if all the adhesive has been removed, clean the body.