GX 470 V8-4.7L (2UZ-FE) (2004)
4. INSTALL RAIN SENSOR
a. Engage the claw as shown in the illustration to set the position.
b. Gradually attach the rain sensor to the glass surface to prevent air babbles in between.
c. Push in the stopper
NOTE:
-
Check that the rain sensor tape does not remain on the wind shield glass. If it does, remove it before installing the rain sensor.
-
Do not touch the silicon sheet surface and the glass surface directly with fingers.
-
Clean up dirt on the glass with a cloth, etc.
-
The rain sensor tape can be re-used, however, replace it with a new one if it has dirt on or is damaged.
-
After installing the rain sensor, air babble should not exist between the wind shield glass and the rain sensor tape.