HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Parking Assist Control Module: Service and Repair
Clearance Warning ECU
Components
PARK ASSIST / MONITORING: CLEARANCE WARNING ECU: COMPONENTS
Removal
PARK ASSIST / MONITORING: CLEARANCE WARNING ECU: REMOVAL
1. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY
(a) Remove the front passenger side knee airbag assembly See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and
Replacement/Knee Airbag Assembly (for Front Passenger Side)/Removal.
2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Removal
3. REMOVE CLEARANCE WARNING ECU ASSEMBLY
(a) Disconnect the connector.
(b) Remove the bolt.
(c) Disengage the clip and guide, and remove the clearance warning ECU assembly.
Installation
PARK ASSIST / MONITORING: CLEARANCE WARNING ECU: INSTALLATION
1. INSTALL CLEARANCE WARNING ECU ASSEMBLY
(a) Engage the guide and clip.
(b) Install the clearance warning ECU assembly with the bolt.
(c) Connect the connector.