HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Keyless Entry Module: Service and Repair
Door Control Receiver (for Luggage Compartment)
Components
DOOR LOCK: DOOR CONTROL RECEIVER (for Luggage Compartment): COMPONENTS
Removal
DOOR LOCK: DOOR CONTROL RECEIVER (for Luggage Compartment): REMOVAL
1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT See: Starting and Charging/Battery/Service and Repair/Removal
2. REMOVE TOOL WITH STAY BOX SUB-ASSEMBLY
3. REMOVE REAR FLOOR FINISH PLATE See: Lighting and Horns/Backup Lamp/Service and Repair/Removal and Replacement/Removal
4. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY See: Lighting and Horns/Trunk Lamp/Service and Repair/Removal
5. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER See: Lighting and Horns/Backup Lamp/Service and Repair/Removal and
Replacement/Removal
6. REMOVE ROPE HOOK
HINT
Use the same procedure for the RH side and LH side See: Lighting and Horns/Backup Lamp/Service and Repair/Removal and
Replacement/Removal.
7. REMOVE INNER LUGGAGE COMPARTMENT TRIM COVER RH
HINT
Use the same procedure for the RH side and LH side See: Lighting and Horns/Backup Lamp/Service and Repair/Removal and
Replacement/Removal.
8. REMOVE NO. 2 DOOR CONTROL RECEIVER
(a) Disconnect the connector.