HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
(a) Remove the bolt and disconnect the discharge hose sub-assembly.
(b) Remove the O-ring from the discharge hose sub-assembly.
NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
11. DISCONNECT AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY
(a) Remove the bolt and disconnect the air conditioning tube and accessory assembly.
(b) Remove the O-ring from the air conditioning tube and accessory assembly.
NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
12. DISCONNECT NO. 5 INVERTER COOLING HOSE
(a) Using pliers, grip the claws of the clip and slide the clip to disconnect the No. 5 inverter cooling hose.
NOTICE:
*
Do not apply excessive force to the No. 5 inverter cooling hose.
*
Prepare a drain pan or cloth in case the coolant leaks.
13. DISCONNECT NO. 7 INVERTER COOLING HOSE
(a) Using pliers, grip the claws of the clip and slide the clip to disconnect the No. 7 inverter cooling hose.
NOTICE:
*
Do not apply excessive force to the No. 7 inverter cooling hose.
*
Prepare a drain pan or cloth in case the coolant leaks.
14. REMOVE NO. 5 INVERTER BRACKET See: Hybrid Drive Systems/Power Control System/Voltage Converter/Service and Repair/Inverter
With Converter/Removal
15. REMOVE RADIATOR SUPPORT LH See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Radiator/Removal
16. REMOVE RADIATOR SUPPORT RH See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Radiator/Removal
17. REMOVE HOOD LOCK SUPPORT SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and
Repair/Radiator/Removal