HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Fuel Pressure Pulsation Damper: Service and Repair
Installation
2AZ-FXE FUEL: FUEL PRESSURE PULSATION DAMPER: INSTALLATION
1. INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY
(a) Apply a light coat of gasoline or spindle oil to a new O-ring and install it to the fuel pressure pulsation damper.
Text in Illustration
(b) Install the fuel pressure pulsation damper with the 2 bolts.
Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)
NOTICE:
Make sure that the O-ring is not cracked or jammed before installing the damper.
2. INSTALL FUEL TUBE SUB-ASSEMBLY
Text in Illustration
(a) Connect the fuel tube.
(b) Push the fuel tube connector until it makes a "click" sound.
(c) Install the No. 2 fuel pipe clamp (Type A).
(d) Install a new No. 2 fuel pipe clamp (Type B).