HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Seat Belt Control Module: Service and Repair
Installation
PRE-COLLISION: SEAT BELT CONTROL ECU: INSTALLATION
1. INSTALL SEAT BELT CONTROL ECU
(a) Engage the 2 claws to install the seat belt control ECU as shown in the illustration.
2. INSTALL ECU INTEGRATION BOX RH See: Power and Ground Distribution/Power Distribution Module/Service and Repair/Installation
3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Installation
4. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY See: Air Bag Systems/Air Bag/Service and Repair/Removal and
Replacement/Knee Airbag Assembly (for Front Passenger Side)/Installation
5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Installation
6. INSTALL INSTRUMENT SIDE PANEL RH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Upper Instrument Panel/Installation
7. INSTALL COWL SIDE TRIM BOARD RH
HINT
Use the same procedure for the RH side and LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation.
8. INSTALL FRONT DOOR OPENING TRIM COVER RH
HINT
Use the same procedure for the RH side and LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation.
9. INSTALL FRONT DOOR SCUFF PLATE RH
HINT
Use the same procedure for the RH side and LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation.
10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL See: Air Bag Systems/Air Bag/Service and Repair/Removal and
Replacement/Steering Pad/Installation
11. INSTALL LUGGAGE COMPARTMENT FLOOR MAT See: Starting and Charging/Battery/Service and Repair/Installation
12. PERFORM DIAGNOSTIC SYSTEM CHECK
(a) Perform diagnostic system check See: Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/DTC Check
/ Clear.
13. INSPECT SRS WARNING LIGHT
(a) Inspect the SRS warning light See: Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System.