lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Components|Page 5246 > < Components|Page 5244
Page 1
background image

Power Distribution Module: Service and Repair
Installation

POWER DISTRIBUTION: POWER MANAGEMENT CONTROL ECU: INSTALLATION

1. INSTALL POWER MANAGEMENT CONTROL ECU

(a) Engage the 2 claws to install the power management control ECU as shown in the illustration.

2. INSTALL ECU INTEGRATION BOX RH

(a) Install the ECU integration box RH with the 2 nuts and bolt.

Torque : 8.4 Nm (86 kgf-cm, 74 in-lbf)

(b) Engage the clamp to connect the wire harness.

(c) Connect each connector.

3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY   See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument

Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Installation

4. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY   See: Restraint Systems/Air Bag Systems/Air Bag/Service and

Repair/Removal and Replacement/Knee Airbag Assembly (for Front Passenger Side)/Installation

5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY   See: Body and Frame/Interior Moulding / Trim/Dashboard /

Instrument Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Installation

6. INSTALL INSTRUMENT SIDE PANEL RH   See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and

Repair/Removal and Replacement/Upper Instrument Panel/Installation

7. INSTALL COWL SIDE TRIM BOARD RH

HINT
Use the same procedure for the RH side and LH side  
  See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation.

8. INSTALL FRONT DOOR OPENING TRIM COVER RH

HINT
Use the same procedure for the RH side and LH side  
  See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation.

9. INSTALL FRONT DOOR SCUFF PLATE RH

HINT
Use the same procedure for the RH side and LH side  
  See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation.

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL   See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal

and Replacement/Steering Pad/Installation

11. INSTALL LUGGAGE COMPARTMENT FLOOR MAT   See: Battery/Service and Repair/Installation

12. PERFORM DIAGNOSTIC SYSTEM CHECK

(a) Perform diagnostic system check    See: Restraint Systems/Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble

Codes/DTC Check / Clear.

Components|Page 5246 > < Components|Page 5244