HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
09958-04011
SST : 09950-60020
09951-00890
09952-06010
NOTICE:
Apply a small amount of grease to the threads and tip of SST (center bolt) before use.
(c) Using SST, install the rear suspension member rear body mounting cushion LH until there is no clearance between the rear suspension member
sub-assembly and the rear suspension member rear body mounting cushion LH.
Text in Illustration
SST : 09950-40011
09951-04020
09952-04010
09953-04030
09954-04020
09955-04051
09957-04010
09958-04011
SST : 09950-60020
09951-00890
09952-06010
NOTICE:
If the rear suspension member sub-assembly is scratched, apply paint to the scratched areas of the rear suspension member
sub-assembly.
(d) Remove SST from the rear suspension member sub-assembly.
4. INSTALL REAR SUSPENSION MEMBER REAR BODY MOUNTING CUSHION RH
(a) Temporarily install the rear suspension member rear body mounting cushion RH so that the holes are positioned longitudinally as shown in the
illustration.