HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
4. INSTALL FRONT DRIVE SHAFT DUST COVER (for RH Side)
(a) Using SST and a press, install a new front drive shaft dust cover as shown in the illustration.
Text in Illustration
SST : 09527-10011
SST : 09726-40010
Standard dust cover depth (A):
1 mm (0.0394 in.)
NOTICE:
*
Install the front drive shaft dust cover in the correct direction.
*
Do not press the front drive shaft dust cover excessively.
5. INSTALL FRONT DRIVE SHAFT DUST COVER RH (for RH Side)
(a) Using SST and a press, install a new front drive shaft dust cover RH as shown in the illustration.
Text in Illustration
SST : 09527-10011
Distance (A):
110.0 to 111.0 mm (4.33 to 4.37 in.)
NOTICE:
*
The front drive shaft dust cover RH should be completely installed.
*
Be careful not to damage the front drive shaft dust cover RH.
6. INSTALL FRONT DRIVE SHAFT DUST COVER LH (for LH Side)
(a) Using SST and a press, install a new front drive shaft dust cover LH into the front drive inboard joint assembly LH until it is flush with the
end.
SST : 09527-10011