IS 250 AWD V6-2.5L (4GR-FSE) (2006)
Remote Switch: Service and Repair
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.
2. REMOVE LOWER NO. 3 STEERING WHEEL COVER
3. REMOVE LOWER NO. 2 STEERING WHEEL COVER
4. REMOVE STEERING PAD
5. REMOVE STEERING PAD SWITCH ASSEMBLY
a. Disconnect the cruise switch connector.
b. Disengage the connector clamp.
c. Disconnect the pad switch connector.
d. Remove the screw.
e. Disengage the 2 claws and remove the steering pad switch.
f.
Remove the screw.
g. Disengage the 2 claws and remove the steering pad switch.
INSTALLATION
1. INSTALL STEERING PAD SWITCH ASSEMBLY