IS 250 AWD V6-2.5L (4GR-FSE) (2006)
c. Disengage the 7 claws and remove the front door scuff plate LH.
51. REMOVE FRONT DOOR SCUFF PLATE RH (w/o Illumination)
52. REMOVE FRONT DOOR SCUFF PLATE LH (w/ Illumination)
a. Put protective tape around the front door scuff plate.
b. Using a moulding remover, disengage the 4 clips.
c. Disengage the 7 claws and remove the front door scuff plate LH.
d. Disconnect the connector.
53. REMOVE FRONT DOOR SCUFF PLATE RH (w/ Illumination)
54. REMOVE FRONT DOOR OPENING TRIM COVER LH
a. Disengage the 4 claws and remove the front door opening trim cover LH.
55. REMOVE FRONT DOOR OPENING TRIM COVER RH
56. REMOVE FRONT PILLAR GARNISH LH