IS 250 AWD V6-2.5L (4GR-FSE) (2006)
/Page-1960031.png)
a. Disengage the claw <A> and separate the bulb holder from the vanity light, as shown in the illustration.
b. Disengage the claw <B> and remove the vanity light assembly.
HINT: Use the same procedure to remove the light on the other side.
134. REMOVE NO. 1 ROOF WIRE
a. Remove the double-sided tape and roof wire.
135. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
136. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
137. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
138. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH
