IS 250 AWD V6-2.5L (4GR-FSE) (2006)
c. Connect the roof wire connector and engage each clamp.
d. Connect each connector to the map light assembly.
14. INSTALL VISOR HOLDER
a. Set the claws of the visor holder as shown in the illustration
b. Engage the claws and install the visor holder.
HINT: Use the same procedure to install the holder on the other side.
15. INSTALL VISOR ASSEMBLY LH
a. Install the visor assembly LH with the 2 screws.
16. INSTALL VISOR ASSEMBLY RH
17. INSTALL VISOR BRACKET COVER