IS 250 AWD V6-2.5L (4GR-FSE) (2006)
2. INSTALL BRAKE ACTUATOR BRACKET ASSEMBLY
a. Install the brake actuator bolt cushion with the actuator bracket assembly.
b. Install the brake actuator to the actuator bracket assembly with the 2 nuts.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
3. INSTALL BRAKE ACTUATOR ASSEMBLY WITH BRACKET
a. Install the actuator assembly with bracket to the body with the 2 bolts and nut.
Torque: 19 Nm (195 kgf-cm, 14 ft. lbs.)
NOTICE: Do not to damage the brake tubes.
b. Using SST, connect the No. 3 front brake tube to the flexible hose.
SST 09023-00101
Torque: 15 Nm (155 kgf-cm, 11 ft. lbs.)
c. Install the grommet to the body
NOTICE: Make sure that the grommet is installed correctly.