IS 250 AWD V6-2.5L (4GR-FSE) (2006)
14. INSTALL RADIATOR SUPPORT OPENING COVER
a. Connect the 2 clips, and install the radiator support opening cover.
15. INSTALL FRONT BUMPER ENERGY ABSORBER
16. INSTALL FRONT BUMPER ASSEMBLY
17. ADD ENGINE COOLANT
18. CHECK FOR ENGINE COOLANT LEAKAGE
19. ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY
20. PUT VEHICLE UNDER THESE CONDITIONS
a. Adjust the tire pressure to the correct value range.
b. Start the engine and charge the battery.
21. FOG LIGHT AIMING ADJUSTMENT
22. FOG LIGHT AIMING INSPECTION
23. INSTALL ENGINE UNDER COVER
24. INSTALL V-BANK COVER SUB-ASSEMBLY
25. INSTALL ENGINE ROOM SIDE COVER LH
26. INSTALL ENGINE ROOM SIDE COVER RH
27. INSTALL COOL AIR INTAKE DUCT SEAL