IS 250 AWD V6-2.5L (4GR-FSE) (2006)
2. CONNECT RADIATOR OUTLET HOSE
a. Connect the radiator outlet hose to the radiator assembly and secure it with the clip.
HINT:
^
Make sure that the claws on the clip are positioned as shown in the illustration.
^
Dimension a in the illustration (between the hose end and the clip end) should be less than 1.0 to 5.0 mm.
^
Connect the hose until it makes contact with the stopper. (Dimension b should be less than 2.5 mm).
3. ADD ENGINE COOLANT
4. START ENGINE
5. CHECK FOR ENGINE COOLANT LEAKAGE
6. INSTALL NO. 1 INLET AIR CLEANER
7. INSTALL COOL AIR INTAKE DUCT SEAL
8. INSTALL V-BANK COVER SUB-ASSEMBLY