IS 250 AWD V6-2.5L (4GR-FSE) (2006)
/Page-699004.png)
b. Remove the 4 bolts, nut and water inlet.
c. Remove the water inlet housing gasket and water outlet pipe O-ring.
23. REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY
a. Remove the bolt, No. 2 idler pulley cover plate and No. 2 idler pulley sub-assembly.
24. REMOVE WATER PUMP ASSEMBLY
a. Remove the 16 bolts, water pump assembly and water pump gasket.
INSTALLATION
