IS 250 AWD V6-2.5L (4GR-FSE) (2006)
B.
Install 3 NEW gaskets as shown in the illustration.
C.
Install a NEW gasket to the head cover.
D.
Install the head cover with the 14 bolts.
Torque: Bolts A:
21 N*m (214 kgf*cm, 15 ft*lbf)
Torque: Bolts except A:
10 N*m (102 kgf*cm, 7 ft*lbf)
12.
Install the cylinder head cover LH.
A.
Apply FIPG sealant as shown in the illustration.
FIPG sealant: P/N 0882600080 (or equivalent)
NOTE
^
Remove any oil from the contact surface.
^
Install the head cover within 3 minutes after applying the FIPG sealant.
^
Do NOT start the engine for at LEAST 2 hours after installing.