IS 250 AWD V6-2.5L (4GR-FSE) (2006)
/Page-588012.png)
18. Remove the fuel pump assembly.
A. Remove the 2 nuts 2 stud bolts and fuel pump.
B. Remove the fuel insulator from the cylinder head cover.
NOTE
^
To keep the nipple joint for the fuel pipe free of foreign matter; cover with a plastic bag.
^
Remove the engine oil out of the oil pool from the cylinder head cover's fuel pump attachment hole.
19. Remove the ignition coil assemblies.
20. Remove the No.1 oil pipe union bolt from the oil pipe.
21. Remove No.2 oil pipe union bolt from the oil pipe.
22. Remove the cylinder head cover LH.
