IS 250 AWD V6-2.5L (4GR-FSE) (2006)
/Page-588036.png)
20. Connect the No.2 fuel pipe.
A. Install the No.2 fuel pipe to the delivery pipe with the 2 bolts.
Torque: 10 N*m (102 kgf*cm, 7 ft*lbf)
B. Using a 19-mm union nut wrench connect the fuel pipe.
Torque: 30 N*m (306 kgf*cm, 22 ft*lbf)
C. Connect the connector to the fuel pump.
21. Install the No. 1 fuel pipe.
A. Install the No.1 fuel pipe with the 2 bolts.
Torque: 10 N*m (102 kgf*cm, 7 ft*lbf)
B. Connect the 2 fuel hoses.
22. Connect the fuel main tube.
