lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

ABOUT US
Variable Valve Timing Actuator Position Sensor > < Oil Pressure Sender|Locations|Page 2856

IS 250 AWD V6-2.5L (4GR-FSE) (2006)

Page 1
background image

Oil Pressure Switch (For Fuel Pump): Testing and Inspection

INSPECT ENGINE OIL PRESSURE SWITCH

a. Disconnect the connector from the engine oil pressure switch.
b. Engine switch on (IG).
c. Ground the terminal of the wire harness side connector, then check the low oil pressure warning light.

OK: Oil pressure warning light comes on.

HINT:  If the warning message is not displayed, go to the problem symptoms table.

Variable Valve Timing Actuator Position Sensor > < Oil Pressure Sender|Locations|Page 2856